Production of vulcanized rubber simulation flower: 1. Pattern making: first, inject vulcanized rubber solution into the mold, and then cool the mold to make the blank of flower or leaf. 2. Coloring: you can color the blanks obtained in the first step by two methods: (1) set up glue: immerse the blanks obtained in the first step into the solution of vulcanized rubber of other colors, and then put forward cooling; (2) color spray: use the spray gun to spray the desired color on the blanks obtained in the first step. 3. Heat forming: place the blank after the second step of coloring in the heat sealing machine, control the heating temperature at about 200-300 ° C, and use the mold to emboss the blank to form the finished product. 4. Assembly and finalization: the whole manufacturing process can be completed by fixing the finished flowers and leaves after the third step of heat closing on the plastic plastic rod manually wound or mechanically.
Simulation flower with cloth base rubber as raw material: 1. Pattern making: first, pearl cotton is used as the raw material for this processing, its thickness is 0.5-1mm, and pearl cotton is placed in the model of the press to punch the cloth base of simulation flower; 2. Glue hanging: immerse the cloth base obtained in the first step into the vulcanized rubber solution, and then propose to cool it, vulcanized rubber is solidified on it, so as to complete the blank making. 3. Coloring: color the blanks obtained in the second step. Heat sealing: put the colored blank in the heat sealing machine in the third step, and control the heating temperature at about 60 ° C. 4. The lower heating temperature is to prevent the pearl cotton as the cloth base from melting under high temperature, and the blank will be embossed by the mold to form the finished product; 5. Assembly and finalization: the whole manufacturing process can be completed by fixing the finished flower and leaf after the fourth step of hot closing on the plastic plastic rod wound by hand I or mechanism.
