At present, there are many occasions in the market that are decorated with simulation trees. The cement simulation trees are made of internal steel structure skeletons, and the exterior is made of cement mortar. The decoration is used to beautify the trunk. The following is the simulation tree production. Process.
1. Fabrication of internal steel frame: Welded angle steel main braces (galvanized angle steel is required for outdoor construction), usually fixed in a chevron shape. Round steel is simulated tree shape, and the spacing is controlled within 30 cm. Angles are used to connect the branches, and the branches are supported by angles or rebars with a diameter of more than 20, and small vines can be formed by hand bending with steel bars.
2. Wrapped barbed wire: Cover the surface of the artificial tree with a barbed wire, and fix it firmly with wire or steel nails.
3. Shaping the surface of the cement mortar: Use the cement mortar to coat the trunk of the tree. After the plasticity is completed, water maintenance is required for 3 days.
4. Tree body coloring: Most of them use acrylic pigment, iron oxide pigment, white cement, branch emulsion, etc. The above ingredients need to be adjusted according to the proportion, and then the specific imitation wood color and lustre requirements are specifically formulated.
5.Leaves and moss decoration: The main ones are fake tree leaves and dry moss. The artificial leaves are tied with the steel bar reserved on the branches with wire or buckles. Adjust, sparse leaves at the end of the branches.
ZheJiang Ruopei Arts & Crafts Co., Ltd
Tel: 86-579-8597-7190
Mobile: 86-19905898261
Fax: 86-579-8597-7190
Email: Tiffany@ruopei.com
Add: No. 10,One Street, Wuhua Road, Heyetang Industrial Zone, Yiwu, Zhejiang, China
