Installation Of Simulation Plant Wall

The simulation plant wall is a wall with high simulation plant layout. It uses the similarity between high simulation plants and real plants to achieve an effect similar to that of a real plant wall or to achieve an effect that cannot be achieved by a real plant. The pursuit of results.

According to different environmental requirements, people have designed different shapes, heights and lows, and harmonious environment wall shapes. After careful design, it can completely achieve the effect of fake and real. The artificial plant wall does not require maintenance, the effect is long-lasting, and the design effect is easy to express. The design effect has a clear hierarchy, low cost and many effects.

The construction process of the artificial plant wall is different from the real plant wall, the introduction is as follows:

Step 1: Install the steel mesh according to the size of the wall

1. Stick the steel mesh on the wall

2. Use an electric hammer to punch holes in the right position

3. Insert the expansion screw and hammer in with a hammer

4. Use a wrench to cover the nut and fix the steel mesh on the wall

Step 2: Splicing of simulated plant wall products

Step 3: Roll up the product for easy installation

Step 4: Fix the product on the wall

1. With the help of scaffolding, put the rolled artificial plant wall products down from the top of the wall.

2. Adjust the product to fit the steel mesh

3. Use cable ties to fix the product on the steel mesh